Vores hjemmesider
© 2026 State Bicycle Co. - EU.
Ikke på lager - €99.99
190 grams. 25mm of setback. Every rail standard covered.
Most riders never think about their seatpost until they're chasing a creak or fighting a saddle angle that won't hold. This one is built so you don't have to think about it. Gloss black unidirectional carbon, a clamp head that actually adjusts, and hardware in the box for whichever saddle you're running.
At 190g it's roughly a third lighter than the alloy post it's replacing — the cheapest real weight you'll ever buy on a bike.
The seatpost is one of the few places on a bike where carbon does something you can actually feel. On a 27.2mm post there's a long, unsupported span between the seat collar and your saddle, and that span flexes. Carbon flexes on a different curve than aluminum — it gives on sharp, high-frequency hits and stiffens up when you put power down.
Translation: chatter from broken pavement, gravel washboard, and chipseal gets filtered before it reaches you. Long days hurt less. Nothing is lost when you stand up and sprint.
That's also why 27.2 is the diameter endurance and gravel frames keep coming back to. It's the skinniest common standard, so it's the one with the most give built in.
Saddle angle on a lot of posts is a coin flip — you get one position, or the next one over, and nothing in between. This head uses a single central bolt with a rocking cradle, so angle is continuously adjustable rather than stepped. Set it where you want it, torque it once, and it stays.
Loosening one bolt also means fore/aft and tilt adjust together, on the bike, without pulling the saddle off or hunting for a second Allen key.
Saddle rails come in two shapes and most posts only ship the hardware for one:
Both cradle sets are in the box. Swap saddles, run whatever you want, no adapter kit to hunt down six months from now.
The saddle clamp sits 25mm behind the post's centerline, so it carries you back over the bottom bracket rather than forward of it.
Choose 25mm setback if: your frame has a slack seat tube angle — most steel frames and classic road geometry do — or you've been running an inline post with the saddle shoved all the way back on its rails and still want more. It also suits riders who sit back and grind out seated power on long days, and anyone who wants rearward adjustment range in hand rather than already spent.
Look elsewhere if: your frame already has a steep seat tube angle, or you're on an inline post with the saddle pushed forward. Setback moves you back roughly 20–25mm, and you may not be able to bring it forward again.
Not sure? Measure the horizontal distance from the center of your bottom bracket to the nose of your saddle on your current setup, then check it again after you swap. That number is what you're trying to preserve.
Check your frame's minimum insertion before you cut anything, and confirm the post reaches at least that depth at your saddle height.
Need more post showing, or no setback at all? The same post comes in 400mm with zero setback.
Carbon posts are easy to install correctly and easy to damage by guessing. Three rules:
If you're not set up for torque work, this is a ten-minute job at any shop.